Polylok Effluent Filter

Category : Septic Tank Filters
Supplier  : SiteAssessor.com

Effluent Filter:

The PL-122 Septic Tank filter. The biggest advantage of this filter is that it has an automatic shut off ball built into every filter. When the filter is removed for regular cleaning, the ball will float up and temporarily shut off the system so the effluent wont leave the tank.

Features

* Offers over 122 linear feet of 1/16th inch filter slots
* Has a flow control ball that shuts off the flow of effluent when the filter is removed for cleanings
* Has its own gas deflector ball which deflects solids away
* Installs easily in new tanks, or retrofits in existing systems
* Comes complete with its own housing; no gluing of tees or pipe
* Has a modular design allowing for increased filtration
* Accepts 4" 110mm pipe

The PL-122 Effluent Filter should operate efficiently for several years under normal conditions before requiring cleaning. It is recommended that the filter be cleaned every time the tank is pumped or at least every three years.

Maintenance Instructions:

1. Locate the outlet of the septic tank.
2. Remove tank cover and pump tank if necessary.
3. Do not use plumbing when cleaning filter.
4. Pull PL-122 out of the housing.
5. Hose off filter over the septic tank. Make sure all solids fall back into septic tank.
6. Insert the filter cartridge back into the housing making sure the filter is properly aligned and completely inserted.
7. Replace septic tank cover.

PL-122 Installation: Ideal for residential and commercial waste flows up to 6,750 Liters Per Day.

Installation Instructions:

1. Locate the outlet of the septic tank.
2. Remove tank cover and pump tank if necessary.
3. Glue the filter housing to the 4"/110mm outlet pipe.
4. Insert the PL-122 filter into its housing.
5. Replace the septic tank cover.